-
Language
Case
The LHB Air Classifier is a new multi-application classifier by our independent R & D, combined the advantages of inertial classification technology and centrifugal classification technology. Technical performance has a qualitative leap compare with traditional vertical and horizontal turbine classifier. Main features: Wide classifying range, high classifying efficiency, high precision cutting point, large capacity, lower energy consumption, wear-resistance, higher reliability and widely applications. It is applied for all kinds of powder materials classifying and cleaning, also it can be used to remove coarse particles from ultrafine and nano-powder.
LHB-C Coarse powder classifier
LHB-C coarse powder classifier is a ring air classifier. The innovative grading structure is composed of grading assembly, inner and outer cylinders, inner and outer cones, circulating air and fineness adjustment device. The material enters the inside of the classifier through the feed port, and the air flow rises with the fan under the action of the material throwing plate. Under the action of gravity centrifugal force, the coarse powder slides to the inner cone and is discharged from the coarse powder port. The fine powder is discharged through the fine powder port along the inner wall of the outer cylinder under the centrifugal force of the classification impeller and the fan impeller.
The LHU Contraflow Classifier is the best choice for the classification of the sticky, aggregated, illiquid and low density material, can separate the superfine powders from 2~150μm efficiency, connected with other classifier also is available.
LHA Cyclone jet mill& classifier
Cyclone jet mill& classifier is a special crushing and grading system that combines original cyclone airflow crushing technology and self-split airflow classification technology. It is the best solution to produce powder materials with narrow particle size distribution. Application examples of battery materials, super-hard materials, luminous (reflective) materials, medicine, pigments, metal oxides, new chemical materials and other fields.
The high-speed mixer has a conical mixing cavity with a multi-blade rotor. The rotation speed and frequency conversion are adjustable. The centrifugal force is generated by the rotor to push the material to the inner wall of the mixing cavity. Due to the special design of the internal rotor blades, the The material moves upward, and the material in the center moves downward, forcing friction, grinding, and squeezing between the materials, resulting in rapid dispersion and mixing of the material particles. Suitable for fine mixing and decentralized operations in industries such as chemical, pesticide, battery materials, food, etc .;
The LHV Powder Disaggregate Mill is mainly used in restoring higher aggregation, calcining agglomerate material, powder restoration ratio can be 100%. It can inlet hot air to dry-grinding material with high moisture. It is the best solution to the ultrafine calcined kaolin, nano calcium carbonate,dye and fire retardant material etc.
LHV Graded depolymerization and dispersing machine
The LHV graded depolymerization and dispersing machine is a new type of depolymerization and dispersing equipment independently developed by our company, that has the advantages of high particle size reduction rate, no damage to the original morphology of the particles, strict control of oversize particles, etc. It has been widely used in the preparation of high-end powders in new materials industry. At the same time, the machine can be used for the surface modification and shaping of materials, improve tap density and change particle morphology.
The material is continuously subjected to squeezing force and shearing force in the cylinder rotating at high speed, and the particle surface reaches a mechanical melting state under the action of friction, thereby coating the nano-scale material on the micro-scale material. It is generally used to spheroidize the particle morphology of negative electrode materials, improve the fluidity and bulk density of the particles, and meet the charging performance of the battery.
The classifying ultrafine grinding mill adopts an innovative crushing and classification integrated structure, which has few moving parts, low energy consumption and high classification accuracy, and is suitable for ultrafine crushing of powder materials with light specific gravity. The fineness of the product can be adjusted by adjusting the speed of the mill. It is suitable for ultrafine crushing of chemical, mineral, pharmaceutical, food, feed and other materials.
HS High temperature steam jet mill
The steam jet mill uses superheated steam as a medium and accelerates into a super-high-speed air flow through a supersonic nozzle, carries materials at high speed striking each other to achieve material grinding.
The LHZ vertical shaping equipment production line has the characteristics of good shaping, high yield of finished products, high tap density of finished products, and large processing capacity of a single set of equipment. It is the preferred shaping equipment in the battery anode material industry.
The Plastic pulverizer uses the shear force generated by the high-speed rotor blade and stator blade to crush the material. It is the best equipment solution for highly elastic and heat-sensitive materials (such as PVA, PVC, PE, PET, PC, etc.) According to the characteristics of the materials, different crushing processes such as normal temperature, low temperature and cryogenic crushing can be selected.
MESSAGE
You can contact us via online message or business communication, or you can call our international sales
hotline 0086-536-2105390
Our service:
COPYRIGHT © Weifang Zhengyuan Powder