Products

PRODUCT

+
  • LHH混合机(891).jpg

LHH High speed mixer

The high-speed mixer has a conical mixing cavity with a multi-blade rotor. The rotation speed and frequency conversion are adjustable. The centrifugal force is generated by the rotor to push the material to the inner wall of the mixing cavity. Due to the special design of the internal rotor blades, the The material moves upward, and the material in the center moves downward, forcing friction, grinding, and squeezing between the materials, resulting in rapid dispersion and mixing of the material particles. Suitable for fine mixing and decentralized operations in industries such as chemical, pesticide, battery materials, food, etc .;

Classify:

Powder Mixer

Keyword:

产品附件:

这里是标题一h1占位文字


Description

The high-speed mixer has a conical mixing cavity with a multi-blade rotor. The rotation speed and frequency conversion are adjustable. The centrifugal force is generated by the rotor to push the material to the inner wall of the mixing cavity. Due to the special design of the internal rotor blades, the The material moves upward, and the material in the center moves downward, forcing friction, grinding, and squeezing between the materials, resulting in rapid dispersion and mixing of the material particles. 
1. Self-overhanging shaft structure, the bearing is not in contact with the material, and the bearing lubrication does not pollute the material;
2. In line with CMP equipment design, high-quality equipment surface treatment, no dead angle in the cavity, the material can be completely discharged;
3. The equipment is easy to disassemble and clean;
4. The gap between the stirring rotor and the inner cavity wall is very small to prevent the material from sticking;
5. The special rotor blade design increases the flow of materials and has a unique high-strength mixing ability;
6. Standardized stirring drive box to ensure the stability of long-distance travel, increase the operating time of the equipment and reduce the operating cost of the equipment;
7. Optional wet spraying operation with vacuum;
8. The entire cavity is protected by a long sleeve, which can accurately control the temperature;
9. It has extremely superior performance when mixing high-viscosity materials;

Pre

Next

Pre

Next

Related Products

LHF coating machine

The raw material powder is coated with the agent through the heat produced by high speed moving of the rotors and material. LHF coating machine has the main features of negative pressure continuously producing, large capacity, lower energy consumption, lower agent consumption and high activation index. It is the best machine to replace high speed mixing coating machine and the best solution for coating 325mesh to nano grade powders.

LHS Fusion Machine

The material is continuously subjected to squeezing force and shearing force in the cylinder rotating at high speed, and the particle surface reaches a mechanical melting state under the action of friction, thereby coating the nano-scale material on the micro-scale material. It is generally used to spheroidize the particle morphology of negative electrode materials, improve the fluidity and bulk density of the particles, and meet the charging performance of the battery.

LHV Graded depolymerization and dispersing machine

The LHV graded depolymerization and dispersing machine is a new type of depolymerization and dispersing equipment independently developed by our company, that has the advantages of high particle size reduction rate, no damage to the original morphology of the particles, strict control of oversize particles, etc. It has been widely used in the preparation of high-end powders in new materials industry. At the same time, the machine can be used for the surface modification and shaping of materials, improve tap density and change particle morphology.

Online Enquiry

Add
*
Submit